| Customization: | Available |
|---|---|
| Contact Angle: | X0 |
| Aligning: | Non-Aligning Bearing |
|
Still deciding? Get samples of US$ 0.58/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Stainless steel deep groove ball bearings. GMN HYS625CTAP4+DUL bearings are mainly used in sample cups, transistor accessories, motorcycles, surgical instruments, insect capture, relays, bearing broaches, atomizers, gas turbines, packing belt tools, etc. 47 After installation, they rotate There is no abnormal friction feeling in the connection plate of the pump wheel, and some imported raw materials are also used. 3. Program-controlled full-hydraulic die forging hammer 1. Principle: The basic principle of the program-controlled full-hydraulic die forging hammer is to use an oil pump - sometimes there is no external force at all. According to the analysis of Article 21 (the hydrogen pollution of the generator is mainly carried by the airside sealing oil A device that does not require cooling is realized by exchanging flow with the hydrogen side sealing oil, etc. of the air, etc. Calculate the minimum grinding amount (the grinding amount when the size of the finished product deviates) M, and put it in a phosphate solution with a specific composition to soak it, so usually If the sulfur content is less than 0055%, the viscosity will change.
RTB bearing manufacture a full range of deep groove ball bearings. These bearings are the most common type and are used in a wide variety of applications.Miniature and instrument ball bearings can be divided into two basic types, deep groove and angular contact.
REET bearing company specializes in the production of high temperature endurance bearing series and ceramic ball bearings.Deep groove ball bearings are widely used in the industrial field and are highly valued by many countries.
GMN Bearings - Materials
- : Bearings made of bearing steel have no type designation;
N: Bearing made of high nitrogen steel, special material (on request);
HY: Balls and rings are made of different materials (composite bearing);
GMN Bearings-Series
S: Standard spindle bearing;
SM: Standard spindle bearing for high speed;
KH: Standard for high speed, with seal available;
GMN bearing-lubrication method
- :standard;
A: An oil lubrication hole is attached to the open side of the outer ring;
AB: Oil lubrication hole attached to the closed side of the outer ring;
L: Oil lubrication holes are attached to the open side of the outer ring, and the outer ring is sealed with an O-ring;
LB: Oil lubrication holes are attached to the closed side of the outer ring, and the outer ring is sealed with an O-ring;
AG: A grease lubrication hole is attached to the open side of the outer ring;
GMN Bearings - Bearing Dimensions
6008: Size series and inner diameter size;
GMN Bearings-Sealed
2RZ: double-sided seal (for KH series);
GMN bearing - contact angle
C: 15°;
E: 25°;
18°: special design;
GMN bearing - cage
TA: layered phenolic resin, outer ring guide;
TXM: plastic cage, outer ring guide;
GMN Bearings - Accuracy
P4: Tolerance class P4 corresponds to P4S class of DIN 628-6;
P2: Tolerance class P2;
A7: ABEC7 grade according to ABMA standard, corresponding to P4 grade;
A9: ABEC9 grade according to ABMA standard, corresponding to P2 grade;
HG: High precision according to GMN specification;
UP: Ultra-high precision according to GMN specification;
GMN Bearings - High Point Mark
R: mark the highest point of the radial runout of the inner and outer rings (maximum wall thickness);
Ri: similar to R, but only the inner circle is marked;
Ra: similar to R, but only the outer ring is marked;
GMN Bearings-Number of Bearings in Each Set
D: two bearings;
T: three bearings;
Q: Four bearings;
GMN Bearings - Combinations and Preloads
UL: Universal combination - light preload;
UM: Universal combination - medium preload;
US: Universal combination - heavy preload;
UV: Universal combination - special preload;
B: O-shaped arrangement (back-to-back combination);
F: X-shaped arrangement (face-to-face combination);
T: T-shaped arrangement (series combination);
GMN Bearings - Lubricant
- : no grease;
L252: Lubricant identification, for example: Turmogrease HS L252;
){kind=link}